Mercury 2 Stroke Oil Ratio. Mercury Premium Plus OptiMax DFI 2 Cycle 2 Stroke Marine Outboard Oil The tilt lever will be on the front or side of the motor Pour the correct amount of 2-stroke oil into a clean gas can
2 stroke mix chart from qpqp.co.uk
Among them, the ratio of 50:1 is the most common and recommended. Stir or shake the container to mix the oil and gas
2 stroke mix chart
The power trim will not lower and I can't find the release screw. We have genuine Mercruiser and Mercury engine oil for sale at discounted prices when ordering online Page 29 Manual, 6 positions Mercury/Quicksilver 2‑Stroke engine oil: Unleaded Engine oil mixing gasoline ratio 1:50 Mercury/Quicksilver gear oil API GL5, SAE #80-90 Gear oil approximately 370 mL (12.5 oz) Fuel tank capacity 25 Liter (6.6 US gal) Gear reduction ratio 13:24 (1.84:1)
Two Stroke Engine Oil Gas Ratio. If you are using an older model two-stroke outboard motor, here is some advice for mixing fuel: As a general rule of thumb, add three ounces of Mercury 2 stroke premium outboard motor oil for each gallon of gas Any motor built after around 1965 will run just fine on 50:1 (20 ml oil on 1 Liter or 2.5 ounces of oil for each gallon of gas) mix
Two Stroke Oil Mix at stevenfloydo blog. Use the mixture within 30 days or add fuel stabilizer to extend the shelf life If the motor is over 30 horsepower, then use premium unleaded gasoline with a posted octane minimum of 95 instead.